Please Wait! Your file will start to download within 10 seconds automatically. Otherwise click here Download
Development of a Motorized Rotary Cassava Peeling Machine
Cassava has become an important economic crop due to its growing use as a raw material in Food, Pharmaceutical and chemical industries causing rapid growth in the demand for cassava products. There is therefore an expansion in its production and processing. Peeling usually precedes most processing operations which makes it very essential. This machine is part of the efforts to mechanize cassava peeling to meet growing demands. The machine uses the abrasive mechanism to peel cassava roots in batches and is driven by an R.165 (6.5hp) diesel engine. Performance evaluation revealed that the machine could peel an average of 30kg cassava roots in 38s at an operating speed of 715 rpm; peel the same weight for 47s and 52s at 652 and 524 rpm respectively. The machine has an average throughput capacity of 0.790, 0.683 and 0.577 kg/s for operating speeds 715, 652 and 524 rpm respectively. Average peeling efficiency of 72.67, 63.83 and 57.67% was obtained for 715, 652 and 524 rpm respectively. It portends a significant breakthrough in the search for an effective mechanized cassava peeling machine
Development, Rotary, Motorized Peeling and Performance Evaluation.
i. Abdulkadri, B.H., (2012): Design and Fabrication of a Cassava Peeling Machine, IOSR Journal of Engineering (IOSRJEN). 2 (6): 01-08
ii. Alhassan, E.A., Ijabo, O.J. and Afolabi, E.O., (2018): Development of Cassava Peeling Machine Using an Abrasive Mechanism, Journal of Production Engineering. (21)1:61-66
iii. Ariavie, G.O. and Ohwovoriole, E.N., (2002): Improved Rotary Cassava Tuber Peeling Machine, Nigerian Journal of Engineering Research and Development. 1(2): 61-63
iv. Egbeocha, C.C., Aboegwu, S.N. and Okereke, N.A.A., (2016): A Review of Performance of Peeling Machines in Nigeria, Federal University of Technology, Owerri Journal Series. 2(1): 140-168
v. Ike, E.A., (2004): Introduction to University Physics, Grace Production Arts and Prints, Jos. 349-443
vi. Khunmi, R.S. and Gupta, J.K., (2008): A Text Book on Machine Design, Eurasia Publishing House Ltd. Ram Nagar, New Delhi. 456-568.
vii. Olukunle, O.J. and Ademosun, O.C., (2006): Development of a double action Self-fed Cassava Peeling Machine, Journal of Food, Agricultural and Environment, Federal University of Technology, Akure (4): 3-4
viii. Srivastava, A.K., Carroll, E.G., Roger, P.R., Dennis, R.B., (2006): Mechanical Power Transmission. St joseph, Michigan. 65-90
ix. Ugwu, K. C. and Ozioko, R. E., (2015): Development and Performance test of Cassava Peeling and Washing Machine, International Journal of Scientific and Engineering Research, 6(6):1572-1579
x. Uthman, F., (2011): Design and Fabrication of Cassava Lump Breaking and Sieving Machine, Oasis Journal of Research and Development (12): 40-42Cite this Article: